The SV-Dmx is a single channel, Constant voltage 6Amp capable Led driver which is controlled by DMX. A maximum of 48Volts (normally 12V or 24V) can be used with this unit allowing up to 12 Leds in a string to be connected in series, a suitable dropper resistor is required as this is a Voltage Driver, this is normally taken care of in the led unit.
flipBox enclosure.

The CV4-Dmx is a 4 channel, Common Anode,Constant voltage LED driver 48Vmax, capable of 6Amps per channel up to a total of 16Amps. 12 Leds in a string to be connected in series, a suitable dropper resistor is required as this is a Voltage Driver, this is normally taken care of in the led unit. Rewireable pluggable terminal blocks 5mm used for all connections. Barrel 2.1mm socket for 3A max / Terminal block used for 16A.
alumBox1 enclosure.

The MV4-Dmx is a 4 channel, Common Anode, Constant Voltage LED driver 28Vmax, capable of 6Amps per channel up to a total of 16Amps. This driver has a lower voltage capability than the CV4. Rewireable plugin connectors,
alumBox1 enclosure.

The QV3-Dmx is a 4 channel, Common Anode, Constant Voltage LED driver 36Vmax, capable of 4Amps per channel. Robust Protected Mosfets used. No enclosure provided. Screw type terminal connectors for power and output , RJ45 connectors for DMX loopthrough.

The QV6-DMX is a 4 channel, Common Anode, Constant voltage LED driver 48Vmax, capable of 4Amps per channel. Screw type terminal connectors for power and output with
Quickbox enclosure.

The SC-Dmx is a single channel, constant Current 350/700mA capable Led driver which is controlled by DMX. A maximum of 48Volts can be used with this unit allowing up to 12 Leds in a string to be connected in series.
flipBox enclosure.

The CC4-Dmx is a 4 channel,Common Anode, Constant Current 350/700mA capable Led driver which is controlled by DMX. A maximum of 48Volts can be used with this unit allowing up to 12 Leds in a string to be connected in series on each channel.
alumBox1 enclosure.

The MC1-Dmx is a single channel 48Vmax (up to 12 leds in series), Constant Current LED driver. Output LED current 350mA or 700mA is selectable with a slide switch on the front.
alumBox1 enclosure.

The MC4-700-Dmx is a 4 channel 48Vmax (up to 12 leds in series), Constant Current LED driver. Output LED current 350mA or 700mA is selectable with a slide switch on the front.
alumBox3 enclosure.

The MC4-700/D1-Dmx is a 4 channel 48Vmax (up to 12 leds in series), Constant Current LED driver. Output LED current 350mA or 700mA is selectable with a slide switch on the front. DMX input is fully isolated on this version.
alumBox2 enclosure.

The QC6-350-Dmx is a 4 channel 48Vmax (up to 12 leds in series), Constant Current LED driver. Output LED current 350mA. DMX input is isolated on this version as an option.
quickBox enclosure.

The CC8-350-Dmx is an 8 channel, 350mA Constant Current LED driver. Designed to drive 8 single power LEDs on seperate DMX channels. The driver was available as a narrow pcb strip 194x24mm for mounting into a suitable lumenaire.

The QC-Card-350-Dmx is a system designed for multiple high power LED strings. One system consists of a Motherboard on which 5 x QC drivers are mounted. Each card can drive 4 seperate channels of LED strings giving up to 25 channels of 350mA drive per channel. Motherboards are stackable to allow expansion. The system needs to be installed with suitable cooling. No enclosure available.

The SV-Dali-2ch is a 2 channel, 28Vmax, Constant Voltage LED Common Anode driver. Each channel can handle 6amps per channel up to 28V. The driver is controlled by Dali IEC62386-102 device type 6(LEDs). Both channels appear as seperate drivers to the Dali controller and are conveniently adjacent to each other during commissioning. 2 x onboard leds allow testing the control without requiring outputs attached.
flipBox enclosure.

The CV4-Dali is a 4 channel, 48Vmax, Constant Voltage LED Common anode driver. Each channel can handle 6amps per channel up to 48V. The driver is controlled by Dali IEC62386-102 device type 6(LEDs). We have provided a dipswitch to select the quantity of channels needed so you can select between 1 to 4. The inactive channels will then be invisible to the controller. All active channels appear as seperate drivers to the Dali controller.
alumBox1 enclosure.

The CC4-Dali is a 4 channel, 48Vmax, Constant Current LED Common anode driver. 350mA or 700mA versions were available. The driver is controlled by Dali IEC62386-102 device type 6(LEDs). We have provided a dipswitch to select the quantity of channels needed so you can select between 1 to 4. The inactive channels will then be invisible to the controller. All active channels appear as seperate drivers to the Dali controller.
alumBox1 enclosure.

The SV0-10/6A is a single channel, 48Vmax, Constant Voltage LED driver, 6Amp capable. There are 4 methods of control:

1. 0-10V external control
2. Onboard potentiometer
3. External 47K/100K potentiometer to ground
4. Occupancy input Remote trigger

The Occupancy input (active low) initiates a ramping brightness to maximum and holds for 90 Seconds before ramping back down to current level ( as set by any of the previous 3 control options).

The SV0-10-TW is a 2 channel 12V/24V, 6Amp max, LED driver designed to tune a white colour by driving seperate warm and Cool leds. There are 2 modes of operation:

1. Dims to Tungsten using 1 control line.
2. Linear Adjust using 2 control lines.

Both require a 0-10V input.

The SC0-10 350/700 is a single channel, 48Vmax, Constant Current LED driver of 350mA or 700mA. There are 4 methods of control:

1. 0-10V external control
2. Onboard potentiometer
3. External 47K/100K potentiometer to ground
4. Occupancy input Remote trigger

The Occupancy input (active low) initiates a ramping brightness to maximum and holds for 90 Seconds before ramping back down to current level ( as set by any of the previous 3 control options).

The CC1-700_4S is a small 50x40mm PCB which contains a 350/700mA Constant Current LED Driver and onboard LI-Ion Charger designed to charge banks of 4 x LI-Ion Cells in series ie 14.4V. An external 24V standard Power supply rated at 1A or more can be used for recharging.

The LV700_V2 is a small 29mm diameter Led Driver capable of driving from 1 to 6 Leds at 700mA constant current from a 5V to 24V supply.There is no adjustment provided.

Information to come..